3D Printing and ABS Recycling: Assessing Virgin and Re-used Filament

Share this Article

In the recently published ‘Investigation of closed loop manufacturing with Acrylonitrile Butadiene Styrene (ABS) over multiple generations using Additive Manufacturing,’ authors Mazher Iqbal Mohammed, Daniel Wilson, Eli Gomez-Kervin, Bin Tang, and Jinfeng Wang explore the impacts of FFF 3D printing on acrylonitrile butadiene styrene (ABS) during multiple recycling processes.

As 3D printing increases in popularity, so does the amount of discarded plastic. And while PLA is biodegradable, ABS is a typical plastic that is not—presenting environmental issues. In this study, the researchers hoped to explore FFF systems in regard to their low power consumption which may lend themselves to a path of greater manufacturing sustainability.

The researchers began using virgin ABS, put through two successive closed-loop filament extrusion and 3D printing phases. In this study they used 100 percent recycled 3D printed ABS, made into filament for re-use—allowing them to investigate parameters and potential for defects along the way.

“Studies have previously reported that changes in melt flow index and mechanical properties occur with ABS after recycling using injection and cast-molding,” stated the researchers. “However, to our best knowledge, no study has examined the influence of multiple closed-loop recycling phases using AM, where the grade of ABS and the thermal process regimes differ from manufacturing by molding processes.”

Virgin ABS pellets were extruded as filament and then 3D printed into parts. The researchers made sure to use plastic from one source only to make sure any differences would be directly comparable. Granules were produced in a uniform size, separated with a sieve with a mesh size of 5 mm.

“To determine the average pellet/granule size, 20 ABS pellets or granules were randomly collected from the source batch and their longest lengths were measured and averaged,” stated the researchers.

(a) Relative print orientations of the tensile and compression test coupons and (b) universal testing machine on which mechanical tests were performed.

While the study centered around the use of virgin ABS, the research team also experimented with one-time, two-time recycled ABS, as well as samples of 90, 80, 70, 60, 50, 40, 30, 20, and 10% virgin ABS. They assessed extrusion flow rate, 3D printing and characterization, polymer analysis, and mechanical property characterization.

In some cases, ‘nonuniformity of granules’ causes blockages, as well as ‘pinning’ because of sharp edges. The researchers tried agitating granules during extrusion to keep filament flowing correctly. Ultimately, the research team found that the FFF 3D printer performed very well with recycled ABS, and over multiple recycling generations too. They deemed the process successful and one that could indeed serve as a valid method of manufacturing with ‘several generations of use.’

(a) (i) A graph depicting the change in extruded filament diameter for changes in extrusion temperature; for clarity, only results for virgin,10% recycled, 50% recycled, and 100% recycled ABS are illustrated. (a) (ii) Temperature differences when extruding a respective ABS blend relative to obtain a filament diameter of 1.75 mm. (b) (i) Extrusion flow rate for various ABS blends comprising varying percentages of recycled to virgin material; for clarity, only results for virgin, 10% recycled, 50% recycled, and 100% recycled ABS are illustrated. (b) (ii) Extrusion flow rate for the various ABS blends when forming filaments with a diameter of 1.75 mm.

“Arguably, FFF has currently had its greatest commercial success in production of concept prototype devices by design companies or in the manufacturing of ornamental items such as toys and models, which generally have no strict mechanical strength requirements. Therefore, we believe that the use of recycled ABS of either one-time or two-times recycled variants could feasibly replace virgin polymer filaments in such applications, as the measured decline in mechanical strength would not impact the function of the end parts or prototypes,” concluded the researchers.

“FFF holds considerable potential for sustainable management of ABS plastics through its reintroduction into wider industrial manufacturing, potentially creating value from what is otherwise a growing burden to resource-recovery sites and landfill.”

ABS is one of the most popular 3D printing materials, for users on every level whether they are creating new materials and composites, refining issues with adhesion, or even making workstations. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.

Comparison in compressive stress for compression samples 3D printed using (a) virgin, (b) one-time recycled, and (c) two-times recycled ABS. (d) Summary of the compressive strain for the various ABS samples printed in the two spatial orientations. (e) Summary table of results for all compression test samples.

 

[Source / Images: ‘Investigation of closed loop manufacturing with Acrylonitrile Butadiene Styrene (ABS) over multiple generations using Additive Manufacturing’]

Share this Article


Recent News

Additive Manufacturing Collaboration: Ai Build & WEBER Offer Advanced Large-Scale 3D Printing Solutions

Qrons is Developing 3D Printable Implants to Treat Brain Injuries



Categories

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns


You May Also Like

3D Printing Awakens Renewed Interest in Polymeric Heart Valves for Patient-Specific Treatment

Authors Charles D. Resor and Deepak L Batte review the recent work of André R. Studart and his co-researchers in creating artificial heart valves via 3D printing. Their findings are...

3D Printed Microfluidic Device Designed to Customize Cancer Treatment

Testing cancer treatments is a lot of trial and error currently, and patients are often subject to multiple uncomfortable and time-consuming therapies before finding one that works. Developments have been...

Comparing the Operational Characteristics of Plastic 3D Printed Spur Gears

Spur gears, which can achieve high transmission ratio and energy efficiency, are comment elements used in the transmission of motion and high intensity power for mechanical power drives, i.e. belt...

Russian Researchers Develop Biocompatible 3D Polymeric Materials for Tissue Repair

Many researchers and scientists have turned to 3D printing for applications in tissue engineering, and a team from the Polymer Materials for Tissue Engineering and Transplantology Laboratory of Peter the Great St....


Shop

View our broad assortment of in house and third party products.


Print Services

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our 3DPrint.com.

You have Successfully Subscribed!