3D Printing Awakens Renewed Interest in Polymeric Heart Valves for Patient-Specific Treatment
Authors Charles D. Resor and Deepak L Batte review the recent work of André R. Studart and his co-researchers in creating artificial heart valves via 3D printing. Their findings are outlined in their recently published article, ‘Polymeric Heart Valves: Back to the Future?’ Along with this is the work previously performed by Studart, et al. predominantly referred to in ‘Bioinspired Heart Valve Prosthesis Made by Silicone Additive Manufacturing.’
While the authors discuss the continued progression of heart valves and replacements, they highlight the work of Studart and his co-researchers, in their creation of a silicone-based polymeric heart valve—harkening back to medical trends beginning in the 1960s. Employing some of the classic benefits of 3D printing, the medical scientists fabricated a prototype with a patient-specific crimpable polymer stent using decidedly more modern methods.
Today, most heart valves as prosthetics are either mechanical or ‘biprosthetic,’ which is the more preferred type (making up 80 to 90 percent of the aortic valve replacements in the US), usually consisting of xenograft tissue valves.
“Now with the advancement of transcatheter aortic valve replacement (TAVR), in which the aortic valve is replaced via a catheter-based crimped valve through, typically, the femoral arterial approach rather than via open cardiac surgery, bioprosthetic valves now account for greater than 90% of all prostheses in the aortic position in certain countries, a percentage that is likely to increase with newer TAVR data and increased availability of the procedure,” state the researchers.
Historically, earlier valves have been created with a variety of materials to include silicone, polyurethane, and other polymers—only to meet with failure structurally, or in causing calcification or thrombosis. Even with the tremendous amount of progress made recently in creating prosthetic heart valves, there have been continued challenges in manufacturing a ‘durable, thrombus-resistant valve,’ which the scientists state would be best from a catheter-based approach. As polymer synthesis has been refined over time, to include a realistic promise for crimpable valves—polymers have become more interesting overall in the manufacturing of valves—whether stand-alone or as scaffolds.
The prototype is an ‘impressive’ valve prototype which has the added advantage of allowing for patient-specific treatment—a wave of the future in medicine, and one which is certainly more than a trend as it eliminates so many problems which emanate from the previous necessity of the one-size-fits-all culture. With the ability to create models directly from 3D scans, or in other cases create implants laden with stem cells from a patient, complications are substantially reduced—meaning much better outcomes overall.
While the ‘in vitro’ assessments are promising, they require more testing, and especially due to so much previous research of limitations regarding polymer valves.
“Other groups have reported polymeric valves achieving ISO minimum standards for in vitro valve testing, and whether silicone or a newer polymer results in the optimal valve material remains to be seen. In potentially complementary work, tissue-engineered valves have reached the stage of successful animal implantation, though serious questions regarding durability persist,” concluded the researchers. “Whether polymeric valve stent struts or valve leaflets such as these can supplement tissue-engineered valves remains to be seen.
“The field of polymeric and tissue-engineered heart valves has long been a promising one. The known limitations of current bioprosthetic and mechanical valves have inspired extensive research with these alternatives, but the impressive science behind them remains at the level of the benchtop and animal testing.”
3D printed implants and medical models and prototypes have lent enormous value to the medical field—and on so many levels—from advantages to patients with more options for specific treatment and better diagnoses, for medical students to practice, and for surgeons to speak with patients and their families and to describe procedures in pre-operative education, along with being able to use the models as surgical planning tools. What do you think of this news? Let us know your thoughts! Join the discussion of this and other 3D printing topics at 3DPrintBoard.com.[Source / Images: ‘Polymeric Heart Valves: Back to the Future?’]
You May Also Like
Formnext: Solvay to Present Solef PVDF AM Filament
No matter your 3D printing user level, if you are attending Formnext, you can look forward to a full education regarding all of the elements required for intensive—and high-performance digital...
3ntr Unveils the Spectral 30 at Formnext: 4 Nozzles, 500° C
3ntr is a dynamic presence at Formnext this year in Frankfurt, Germany (running from November 19-22), introducing the new Spectral 30 3D printer, produced via the Clean Sky project–a European...
BeAM at Formnext: New Partnerships & Accelerated Progress in Directed Energy Deposition
As Formnext begins today, running from November 19-22 in Frankfurt, Germany, manufacturers continue to release enticing bits of information regarding what visitors can expect upon touring over 600 exhibitions. BeAM...
Generative Design, Digital Twin, WAAM 3D Printing Used to Optimize Industrial Robot Arm
3D printing specialist MX3D has been working on a metal AM technology to create large items, such as bicycles and bridges, using robots. Now, the Dutch startup has partnered up...
View our broad assortment of in house and third party products.